DSC HS2128 Reference Manual page 235

Exit Time and Progress
Annunciation/Disable or
System times and audible exit beeps can be disabled when using the wireless key
Remote Arming
to stay arm the system. When away arming, audible exit beeps can not be
disabled.
[861]>[001]-[005], option
4
Entry delay(s) Access to entry and exit delays and bell time out for the system
[005]>[001]-[008], options Note: Combined entry delay and communications delay (abort window) shall not
1 and 2 exceed 60s.
Abort Window for Non-
Fire zones
Access to zone attributes, i.e., swinger shutdown, transmission delay and cross
zone. May be disabled by zone or zone type.
[002]>[001]-[128], option
7 ON
Abort Window Time - for Access to the programmable delay before communicating alarms
Non-Fire zones
Note: Combined entry delay and communications delay (abort window) shall not
[377]>[002], option 1 exceed 60 seconds.
Abort Annunciation An audible tone is generated when an alarm is aborted during the abort window.
Duress Feature
When this feature is enabled, selected user codes send a duress reporting code
to the central station when used to perform any function on the system. Section
[*][5]> master code> user
[019], option [6] must be enabled.
2-95> 5> 2
Cancel Window
Access to the communications cancel window. Minimum duration must be 5
minutes.
[377]>[002], option 6
Cancel Annunciation
Access to the reporting code for Alarm Canceled.
[308]>[001], option 8
Cross Zoning
Enables cross zoning for entire system. Zones can be enabled for cross zoning
[042]>Selection 3, option
via zone attribute option 8 in sections [002][101] - [128].
002
Burglary Verification
Timer
Access to the programmable Cross Zone timer.
[005]>[000], option 3
Swinger Shutdown for
Access to the swinger shutdown limit for zone alarms
Alarms
For all non-fire zones, shut down at 1 to 6 trips.
[377]>[001], option 1
Appendix 4: Regulatory Approvals
- 235 -
Default:
Allowed
Enabled
Range: 30 sec.
Required
to 4 min.
(programmable)
Default: 30
sec.
Required
Default:
Enabled
Range: 00 - 45
sec. Required
Default: 30 (programmable)
sees
Hard-coded
Required
ON
Default: N Required
Range: 005-
255
Default: 005
A Cancel was
transmitted Required
Default:
Enabled
Programming
required
Required
Default:
Disabled
Range: 000-
255 sec.
Allowed
Default: 60
seconds
Required
Default: 2 trips
(programmable)