Enrollment - DSC HS2128 Reference Manual

4.3 Enrollment

All optional modules and devices must be enrolled on the system. During enrollment, the electronic serial number (ESN) of
each device is identified to the control panel and zones are assigned. A wireless transceiver HSM2HOST or an RF keypad
must be enrolled first before wireless devices can be enrolled.
4.3.1 Enrolling Modules
During automatic and manual enrollment, if an attempt is made to enroll more than the maximum number of modules, an
error tone sounds and a message is displayed on LCD keypads.
Table 4-1 Module Capacity
Module
HSM2108 8 Zone expander
HSM2208 8 Output expander
Wireless Keypad:
HS2LCDRF(P)4
HS2ICNRF(P)4
HS2LCDWF(P)(V)4
HS2TCHP Touchscreen Keypad
HSM2300 Power Supply 1A
HSM2204 4 High-current Output
HSM2HOSTx Transceiver
HSM2955
(not UL evaluated)
Modules can be enrolled automatically or manually using section [902] of Installer programming. For instructions on
enrolling modules, see "Module Programming" on page 133.
To confirm that a module has been successfully enrolled, use Installer Programming section [903]. See "[903] Confirm Mod-
ule" on page 134 for details.
Enrolling the First Keypad
To enroll a hardwired keypad, connect the keypad to the alarm controller, power up the alarm panel then press any button
on the keypad.
To enroll a wireless keypad, first connect the HSM2HOSTx wireless integration module to the alarm controller. Next, power
up the alarm panel and a wireless keypad. Press any button on the keypad to enroll it on the HSM2HOSTx. The
HSM2HOSTx is then enrolled on the alarm panel. To enroll other keypads, see "Module Programming" on page 133.
4.3.2 Module Supervision
By default, all modules are supervised upon installation. Supervision is enabled at all times so that the panel can indicate a
trouble if a module is removed from the system.
To check which modules are currently connected and supervised, see "[903] Confirm Module" on page 134.
If a module is connected but is not recognized by the system, it may be due to any of the following reasons:
Section 4: Configuration
HS2016- HS2016 HS2032 HS2064/
4
1
1
2
2
8
8
8
8
3 3
1
1
1
1
1 1
- 31 -
HS2064 E
3 7
4 8
8 8
8 8
3 3
1 3
1 1
1 1
HS2128/HS2128 E
15
16
16
16
4
4
1
1