Welder Manifold Components (Option) - Genie GS-3384 Service And Repair Manual

Service and Repair Manual
Manifolds
7-5 W elder M anifol d C omponents ( option)
7-5
Diverter Manifold Components (welder option)
The welder manifold is located under the drive manifold.
Index
Description
No.
1 Directional valve
2 Orifice, 0.030 inch / .76 mm
3 Solenoid Valve, 2 position 3 way
4 Relief valve, 270 psi / 18.6 bar
5 Check valve, 3 psi / .21 bar
Note: 'alpha' callouts refer to corresponding notes on the hydraulic schematic.
Note: 'alpha-numeric' callouts refer to corresponding notes on the electrical schematic.
82
Schematic
Function
Item
FA Diverter valve
FB Delays shift to drive
FC Pilot valve to diverter
FD Charge pressure circuit
FE Prevents oil to generator
GS-84 • GS-90
September 2016
Torque
80-90 ft-lbs / 108-122 Nm
35-40 ft-lbs / 47-54 Nm
35-40 ft-lbs / 47-54 Nm
35-40 ft-lbs / 47-54 Nm
35-40 ft-lbs / 47-54 Nm
Part No. 1272222