Traction Manifold Components - Genie GS-3384 Service And Repair Manual

Service and Repair Manual
Manifolds
7-3 Tr acti on Manifold Com ponents
7-3

Traction Manifold Components

The traction manifold is located under the function manifold
Index
Description
No.
1 Flow divider/combiner valve
2 Orifice Plug, 0.043 inch / 1.1 mm
3 Diagnostic port
4 Orifice Plug, 0.046 inch / 1.2 mm
5 Relief valve, 280 psi / 19.3 bar
6 Solenoid Valve, 2 position 3 way
7 Orifice Plug, 0.035 inch / 0.9 mm
8 Orifice Plug, 0.045 inch / 1.1 mm
9 Shuttle valve. 2 position, 3 way
10 Solenoid Valve, 2 position 3 way
11 Flow divider/combiner valve
12 Flow divider/combiner valve
13 Orifice Plug, 0.090 inch / 2.3 mm
14 Diagnostic port
78
Schematic
Function
Item
EA Controls flow to front and rear
drive motors
EB Balances flow from flow
divider/combiner (item EL) to front
drive motors
EC Testing "P2" pressure port
ED Balances flow from flow
divider/combiner (item EK) to rear
drive motors
EE Charge pressure circuit
EF 2-speed motor shift circuit
EG Brake circuit
EH 2-speed motor shift circuit
EI Charge pressure circuit that gets
hot oil out of low pressure side of
drive pump and allow slow
pressure flow path for brake
release and 2-speed motor shift
EJ Brake release
EK Controls flow to non-steer end
drive motors in forward and
reverse
EL Controls flow to steer end drive
motors in forward and reverse
EM Balances flow from flow
divider/combiner (item EA) to front
and rear drive motors
EN Testing "P1" pressure port
GS-84 • GS-90
September 2016
Torque
95 - 100 ft-lbs
129 - 135 Nm
25 ft-lbs / 34 Nm
25 - 30 ft-lbs
34 - 41 Nm
20 ft-lbs / 27 Nm
50 ft-lbs / 68 Nm
20 ft-lbs / 27 Nm
70 - 75 ft-lbs
95 - 102 Nm
70 - 75 ft-lbs
95 - 102 Nm
25 ft-lbs / 34 Nm
Part No. 1272222