Genie GS-3384 Service And Repair Manual page 55

September 2016
6 Cut the zip ties attaching the hydraulic hoses
to the lift cylinder. Lay the hoses out of the
way.
Component damage hazard.
Hoses can be damaged if they
are kinked or pinched.
7 Attach a lifting strap from an overhead crane
or similar lifting device to the lifting eye at the
rod end of the lift cylinder for support.
1 rod end
2 lifting eye
3 barrel end
8 Attach a lifting strap from a second overhead
crane or similar lifting device to the lifting eye
at the barrel end of the lift cylinder for support.
9 Remove the lift cylinder rod-end pivot pin
retaining fastener. Use a soft metal drift to
remove the pin.
Crushing hazard. The lift cylinder
will fall unless it is properly
supported.
10 Carefully lower the cylinder onto the cross
tube of the number 2 inner arm. Protect the
cylinder rod from damage.
Component damage hazard.
The counterbalance valve on the
lift cylinder can be damaged if it
is allowed to come in contact
with the scissor arm cross tube.
Part No. 1272222
Scissor Components
11 Remove the lift cylinder barrel-end pivot pin
retaining fastener. Use a soft metal drift to
remove the pin.
Note: Use of the overhead crane may be required
for the pin to clear the link set.
12 Carefully pull the lift cylinder out the non-steer
end of the machine through the scissor arms
and safety arm. Remove the lift cylinder from
the machine.
GS-84 • GS-90
Service and Repair Manual
Crushing hazard. The lift cylinder
will fall unless it is properly
supported.
Crushing hazard. The lift cylinder
may become unbalanced and fall
when it is removed from the
machine if not properly
supported.
43