Genie GS-3384 Service And Repair Manual page 129

September 2016
ID System Ready
56 RIGHT TURN
COIL FAULT
57 LEFT TURN COIL
FAULT
58 BRAKE COIL
FAULT
60 FORWARD 1
COIL FAULT
61 REVERSE 1 COIL
FAULT
62 FORWARD 2
COIL FAULT
63 REVERSE 2 COIL
FAULT
64 OSCILLATE LEFT
COIL
65 OSCILLATE
RIGHT COIL
66 LOW OIL
PRESSURE
67 HIGH COOLANT
TEMPERATURE
Part No. 1272222
LED Condition
Red Right turn coil (Y3) fault.
Red Left turn coil (Y4) fault.
Red Brake release coil (Y2) fault. Brakes will not release. Troubleshoot coil OR wiring.
Red Forward 1 coil (Y6) fault.
Red Reverse 1 coil (Y5) fault.
Red Forward 2 coil (Y6A) fault.
Red Reverse 2 coil (Y5A) fault.
Red Value to low or Value to
high.
Red Value to low or Value to
high.
Red Low oil pressure.
Red High coolant temperature.
GS-84 • GS-90
Service and Repair Manual
Result Solution
Steer right function Troubleshoot coil OR wiring.
inhibited.
Steer left function Troubleshoot coil OR wiring.
inhibited.
Drives slow or not at all Troubleshoot coil OR wiring.
when elevated.
Drives slow or not at all Troubleshoot coil OR wiring.
when elevated.
Drives slow or not at all Troubleshoot coil OR wiring.
when elevated.
Drives slow or not at all Troubleshoot coil OR wiring.
when elevated.
Elevated drive and Troubleshoot oscillate left
platform up disabled. valve coil (Y93) or wiring.
Elevated drive and Troubleshoot oscillate right
platform up disabled. valve coil (Y94) or wiring.
Engine stops. Check the engine oil level
OR check wiring from the oil
pressure switch to ECM OR
replace the oil pressure
switch.
High engine Gasoline/LPG models: Check
temperature OR the engine radiator coolant
defective engine level OR check the wiring from
coolant or oil the water temperature switch
temperature switch. to ECM OR replace the water
temperature switch.
Diesel models: Check the
engine oil level OR check the
wiring from the oil temperature
switch to ECM OR replace the
oil temperature switch.
Fault Codes
117