Genie GS-3384 Service And Repair Manual page 43

September 2016
4 Place a 12 inch / 30 cm block under the center
of the scissor arm pair. Lower the scissor arm
pair onto the block.
5 Remove the external snap rings from both
center pivot pins.
6 Use a soft metal drift to remove both center
pins.
7 Carefully separate the scissor arm pair.
Crushing hazard. The scissor
arms could become unbalanced
and fall if not properly supported
by the overhead cranes.
Part No. 1272222
Scissor Components
GS-84 • GS-90
Service and Repair Manual
31