Genie GS-3384 Service And Repair Manual page 35

September 2016
44 Carefully remove the number 2 inner and
outer arms (index #5 and #6) from the
machine.
Crushing hazard. The number
2 inner and outer arms could
become unbalanced and fall
when they are removed from the
machine if not properly
supported by the overhead
crane.
Note: If further disassembly of the scissor arm pair
is required, refer to Repair Procedure, How to
Disassemble a Scissor Arm Pair.
45 Remove the cables from the number 1 inner
arm (index #8).
46 Secure both ends of the number 1 inner and
outer arms (index #8 and #16) together with a
strap or other suitable device.
47 Attach a lifting strap from an overhead crane
to the number 1 inner and outer arms (index
#8 and #16) at the steer end of the machine.
Do not apply any lifting pressure.
48 Attach a lifting strap from an overhead crane
to the number 1 inner and outer arms (index
#8 and #16) at the non-steer end of the
machine. Do not apply any lifting pressure.
49 Remove the pin retaining fasteners from both
chassis centering link pivot pins (index #18) at
the number 1 inner arm.
50 Place a rod through each chassis centering
link pivot pin and twist to remove the pin. Rest
the centering links on the chassis.
51 Remove the pin retaining fasteners from the
number 1 inner arm slide blocks (index #19) at
the steer end of the machine.
Part No. 1272222
Scissor Components
52 Use a slide hammer to remove the number
1 inner arm slide block pivot pins (index #19).
53 Use a slide hammer to remove the number
1 outer arm slide block pivot pins (index #19)
at the non-steer end of the machine.
54 Carefully remove the number 1 inner and
outer arms (index #8 and #16) from the
machine.
Note: If further disassembly of the scissor arm pair
is required, refer to Repair Procedure, How to
Disassemble a Scissor Arm Pair.
GS-84 • GS-90
Service and Repair Manual
Crushing hazard. The number
1 inner and outer arms could
become unbalanced and fall
when they are removed from the
machine if not properly
supported by the overhead
crane.
23