Genie GS-3384 Service And Repair Manual page 73

September 2016
ANSI and CSA models with all software
revisions:
18 Use the yellow platform down arrow to scroll to
return to the main menu.
Result: RETURN TO MAIN MENU is showing
in the diagnostic display window.
19 Press the lift function enable button.
Result: SELECT OPTIONS is showing in the
diagnostic display window.
20 Push in the red Emergency Stop button to the
off position at the ground controls.
AS and CE models with all software revisions:
1 Turn the key switch to ground controls and pull
out the red Emergency Stop buttons to the on
position at both platform and ground controls.
Result: The revision level of the ECM will
appear in the LED display window. Note the
result.
2 Push in the red Emergency Stop button to the
off position at the ground controls.
3 Press and hold both the blue platform up and
yellow platform down buttons. Pull out the red
Emergency Stop button to the on position at
the ground controls.
Result: TUNE SPEEDS is showing in the
diagnostic display window.
1 diagnostic display
2 blue platform up button
3 lift function enable button
4 yellow platform down button
Part No. 1272222
4 Use the yellow platform down arrow to scroll to
select model.
Result: SELECT MODEL is showing in the
diagnostic display window. The ECM is now in
programming mode.
5 Press the lift function enable button.
Result: GS68 DUAL FUEL is showing in the
diagnostic display window.
6 GS-84 models with gasoline/LPG power:
Use the yellow platform down arrow to scroll to
GS84 DUAL FUEL.
GS-84 models with diesel power: Use the
yellow platform down arrow to scroll to GS84
DIESEL.
GS-90 models with gasoline/LPG power:
Use the yellow platform down arrow to scroll to
GS90 DUAL FUEL.
GS-90 models with diesel power: Use the
yellow platform down arrow to scroll to GS90
DIESEL.
7 Press the lift function enable button to activate
the model/power option.
Result: SELECT MODEL is showing in the
diagnostic display window.
8 Use the yellow platform down arrow to scroll to
select options.
Result: SELECT OPTIONS is showing in the
diagnostic display window. The ECM is now in
programming mode.
9 Press the lift function enable button.
Result: DESCENT DELAY ON is showing in
the diagnostic display window.
Result: DESCENT DELAY OFF is showing in
the diagnostic display window. Press the lift
function enable button to activate the descent
delay option.
Note: For AS and CE models, the descent delay
option should be activated or in the on position.
GS-84 • GS-90
Service and Repair Manual
Ground Controls
61