Genie GS-3384 Service And Repair Manual page 66

Service and Repair Manual
Ground Controls
5 Press the lift function enable button.
6 Use the yellow platform down arrow to scroll to
max fwd high torque drive.
Result: MAX FWD RAISED DRIVE speed is
showing in the diagnostic display window.
7 Press the lift function enable button.
8 Press the yellow platform down button to
decrease the drive speed or press the blue
platform up button to increase the drive speed.
Refer to Specifications, Performance
Specifications.
Note: The performance achieved should always be
within specifications.
9 Press the lift function enable button.
Result: TUNE SPEEDS is showing in the
diagnostic display window. The ECM is now in
programming mode.
1 diagnostic display
2 blue platform up button
3 lift function enable button
4 yellow platform down button
10 Press the lift function enable button.
11 Use the yellow platform down arrow to scroll to
max rev high speed drive.
Result: MAX REV RAISED DRIVE SPEED is
showing in the diagnostic display window.
12 Press the lift function enable button.
54
13 Press the yellow platform down button to
decrease the drive speed or press the blue
platform up button to increase the drive speed.
Refer to Specifications, Performance
Specifications..
Note: The performance achieved should always be
within specifications.
14 Press the lift function enable button.
15 Push in the red Emergency Stop button to the
off position at the ground controls.
16 Check the raised drive speed of the machine.
Refer to Maintenance procedure in the
appropriate Service or Maintenance Manual
for your machine, Test the Drive Speed -
Raised Position.
GS-84 • GS-90
September 2016
Part No. 1272222