Displaying The Memory Viewer Screen; Playing The Pictures; Executing The Slide; Termination Of The Memory Viewer - Panasonic PT-TMZ400 Operating Instructions Manual

Chapter 5 Operation of Function - Projecting with MEMORY VIEWER input

Displaying the Memory Viewer screen

1) Press the <NETWORK/USB> button on the remote control to switch the input source to MEMORY
VIEWER.
f You can also press the <INPUT SELECT> button on the control panel and select the input source in the
Input menu.
2) Attach the USB memory directly into the <USB (VIEWER/WIRELESS/DC OUT)> terminal.
f The standby screen "please press ENTER" is displayed while the USB memory icon is displayed at the
lower left of the screen.
3) Press the <ENTER> button on the remote control.
f The root directory of the USB memory will be displayed in thumbnail on the screen.

Playing the pictures

1) Press asqw on the remote control to select a file you want to play on the memory viewer screen.
2) Press the <ENTER> button on the remote control.
f The picture will display on the full screen.
3) Press w to switch to the next picture, press q to return to the previous picture.
4) Press the <ENTER> button on the remote control.
f Return to the thumbnail screen.
Note
f When the recorded number of pixels is smaller than the maximum number of display dot
aspect ratio.
f When the recorded number of pixels is larger than the maximum number of display dot
ratio.
f When the recorded number of pixels is the same as the maximum number of display dot
degradation of image quality can be reduced.
*1 The maximum number of display dot for each product is as follows.
PT-TMZ400: 1 920 x 1 200
PT-TMW380: 1 280 x 800
PT-TMX380: 1 024 x 768

Executing the slide

All pictures in the same folder will play automatically according to the settings of [SORT ORDER], [SLIDE TRANSITION
EFFECT] and so on of the [MEMORY VIEWER] menu.
1) Press asqw on the remote control to select a file.
2) Press the <MENU> button to select the [MEMORY VIEWER] → [SET SLIDE].
3) Press the <ENTER> button on the remote control.
f The slideshow will start.
f Press the <ENTER> button to return to the thumbnail screen.
Note
f If you press the <MENU> button during playback in the slideshow, the playback will stop and the a menu displays. The playing will continue
when the menu disappears.

Termination of the Memory Viewer

1) Press asqw to select the thumbnail
2) Press the <ENTER> button on the remote control.
f Return to the standby screen "please press ENTER".
Depending on file path length, you may need to repeat Step 1) and Step 2) before returning to the standby
screen.
Note
f You can also exit the Memory Viewer by switching to the input other than MEMORY VIEWER.
108 - ENGLISH
, it will be displayed enlarged maintaining the
*1
, it will be displayed reduced maintaining the aspect
*1
, it will neither be enlarged nor reduced, so
*1
which is displayed on the upper left corner.