Table of Contents
Advertisement
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 92) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press awsqawsq in order, and press the <ENTER> button.
Attention
f When you select the [SECURITY] menu and press the <ENTER> button, entering a password is prompted. Enter the preset password and
then continue operations of the [SECURITY] menu.
f When the password has been changed previously, enter the changed password, and press the <ENTER> button.
Note
f The entered password is displayed with * marks on the screen.
f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
[SECURITY PASSWORD]
Display the [SECURITY PASSWORD] screen when the power is turned on with the <MAIN POWER> switch set
to the <OFF> side. When the entered password is incorrect, the operation will be restricted to the <STANDBY>
button, the <SHUTTER> button, and the <LENS> buttons (<FOCUS>, <ZOOM>, <SHIFT>).
1)
Press as to select [SECURITY PASSWORD].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f The item is set to [OFF] by the factory default setting, or after initialized by one of the following methods. Set it to [ON] as necessary.
g When initialized by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g When initialized by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
f Change the password periodically that is hard to guess.
f The security password is enabled after setting [SECURITY PASSWORD] to [ON] and turning the <MAIN POWER> switch to <OFF>.
[SECURITY PASSWORD CHANGE]
Change the security password.
1)
Press as to select [SECURITY PASSWORD CHANGE].
2)
Press the <ENTER> button.
f The [SECURITY PASSWORD CHANGE] screen is displayed.
3)
Press asqw and the number (<0> - <9>) buttons to set the password.
f Up to eight button operations can be set.
4)
Press the <ENTER> button.
5)
Re-enter the password for the confirmation.
6)
Press the <ENTER> button.
Note
f The entered password is displayed with * marks on the screen.
f When numerical values are used for the security password, the security password is required to be initialized if the remote control is lost.
Consult your dealer for the method of initialization.
Chapter 4 Settings — [SECURITY] menu
Disables the security password entry.
Enables the security password entry.
ENGLISH - 199
Advertisement
Table of Contents
