[Hdmi Signal Level]; [Screen Setting]; [Auto] - Panasonic PT-LMZ460 Operating Instructions (Functional Manual)

3) Press as to select [OSD SIZE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[DOUBLE]
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [WARNING MESSAGE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f When [WARNING MESSAGE] is set to [OFF], the warning message will not be displayed on the projected image even if a warning status
such as "TEMPERATURE WARNING" is detected. The prompting message for filter replacement/maintenance will not be displayed either.

[HDMI SIGNAL LEVEL]

Switch the setting when the external equipment is connected to the <HDMI IN 1> terminal / <HDMI IN 2> terminal of the
projector and the image is not projected correctly.
1) Press as to select [HDMI SIGNAL LEVEL].
2) Press qw to switch the item.
f The items will switch each time you press the button.

[AUTO]

[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operation instruction of the external
device regarding the output of the external device.
f The displayed signal level is assumed when the input is 30 bits.

[SCREEN SETTING]

Set the screen size.
When changing the aspect of a projected image, correct to the optimum image position for the set screen. Set as
necessary for the screen in use.
1) Press as to select [SCREEN SETTING].
2) Press the <ENTER> button.
f The [SCREEN SETTING] screen is displayed.
3) Press as to select [SCREEN FORMAT].
4) Press qw to switch the [SCREEN FORMAT] item.
f The items will switch each time you press the button.
80 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
Use this setting normally.
The menu screen is displayed with the font size twice as much as set in [NORMAL]. The menu
screen size is doubled both vertically and horizontally.
Displays the warning message.
Hides the warning message.
Sets the signal level automatically.
Select when the HDMI terminal of an external device (such as a blu-ray player) is connected to the
<HDMI IN 1> terminal / <HDMI IN 2> terminal.
Select when the DVI-D terminal output of an external device (such as a computer) is connected to the
<HDMI IN 1> terminal / <HDMI IN 2> terminal via a conversion cable or similar cable.
Select also when the HDMI terminal output of a computer or other device is connected to the <HDMI
IN 1> terminal / <HDMI IN 2> terminal.