Configuring The 802.11A/N Or 802.11B/G/N Radio - Motorola P-7131N-FGR Product Reference Manual

5-56 Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
CAUTION When defining a Mesh configuration and changes are saved, the
9. Click Undo Changes
settings displayed on the Radio Configuration screen to the last saved configuration.
10. Click Logout
logout before the applet is closed.
Once the target radio has been enabled from the
the radio's properties by selecting it from the access point menu tree.
For more information, see

5.3.2.1 Configuring the 802.11a/n or 802.11b/g/n Radio

Configure an 802.11a/n or 802.11b/g/n radio by selecting the radio's name (as defined using the
802.11a/n or 802.11b/g/n radio configuration screen described below) as a sub-menu item under the
Radio Configuration menu item. Use the radio configuration screen to set the radio's placement
properties, define the radio's threshold and QoS settings, set the radio's channel and antenna settings
and define beacon and DTIM intervals.
To configure the access point's 802.11a/n or 802.11b/g/n radio:
1. Select Network Configuration
name) from the access point menu tree.
mesh network temporarily goes down. The Mesh network is
unavailable because the access point radio is reconfigured when
applying changes. This can be problematic for users making changes
within a deployed mesh network. If updating the mesh network using
a LAN connection, the access point applet loses connection and the
connection must be re-instated. If updating the mesh network using a
WAN connection, the access point applet does not lose connection,
but the mesh network is unavailable until the changes have been
applied.
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the Access Point applet. A prompt displays confirming the
Configuring the 802.11a/n or 802.11b/g/n Radio on page
->
Radio Configuration
Wireless -> Radio Configuration
screen, configure
5-56.
-> Radio1 (default