Table of Contents
Advertisement
2-8
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
CAUTION The access point supports any standards-based compliant power
2.6.1 Installing the Power Injector
Refer to the following sections for information on planning, installing, and validating the installation:
•
Preparing for Site Installation
•
Cabling the Power Injector
2.6.1.1 Preparing for Site Installation
The Power Injector can be installed free standing, on an even horizontal surface or wall mounted
using the unit's wall mounting key holes. The following guidelines should be adhered to before
cabling the Power Injector to an Ethernet source and access point:
• Do not block or cover airflow to the Power Injector
• Keep the unit away from excessive heat, humidity, vibration and dust.
source (including non-Motorola Solutions power sources). However,
using the wrong solution (including a POE system used on a legacy
Motorola Solutions access point) could either limit functionality or
severely damage the access point and void the product warranty.
Advertisement
Table of Contents
