Setting The Type Filter Configuration - Motorola P-7131N-FGR Product Reference Manual

5-14 Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
3. Specify a lease period in seconds for available IP addresses using the
(Seconds)
specify. The default interval is 86400 seconds.
4. Click the
If a statically mapped IP address is within the IP address range in use by the DHCP server,
that IP address may still be assigned to another client. To avoid this, ensure all statically
mapped IP addresses are outside of the IP address range assigned to the DHCP server.
If multiple entries exist within the Reserved Clients field, use the scroll bar to the right of
the window to navigate.
5. Click the
6. Click OK
Advanced DHCP Server
7. Click Cancel
the last saved configuration.

5.1.2.2 Setting the Type Filter Configuration

Each access point LAN (either LAN1 or LAN2) can keep a list of frame types that it forwards or
discards. The Type Filtering feature prevents specific (a potentially unneccesary) frames from being
processed by the access point in order to improve throughput. These include certain broadcast frames
from devices that consume bandwidth, but are unnecessary to access point operations.
Use the Ethernet Type Filter Configuration
as either allowed or denied for use with the this particular LAN.
To configure type filtering on the access point:
1. Select Network
point menu tree.
The Ethernet Type Filter Configuration
are displayed (by default) when the screen is first launched.
parameter. An IP address is reserved for re-connection for the length of time you
Add button to create a new table entry within the
Del (delete) button to remove a selected table entry.
to return to the LAN1 or LAN2 page, where the updated settings within the
screen can be saved by clicking the
to undo any changes made. Undo Changes reverts the settings displayed to
Configuration->
screen to build a list of filter types and configure them
LAN -> LAN1 (or LAN2)->
screen displays for the LAN. No Ethernet types
DHCP Lease Time
Reserved Clients field.
Apply button.
Type Filter from the access