Motorola P-7131N-FGR Product Reference Manual page 122

4-32 Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
SNMP v3 Engine ID
5. Click Apply
screen without clicking the Apply button results in all changes to the screen being lost.
6. Click Undo Changes
settings displayed on the SNMP Access screen to the last saved configuration.
7. Click Logout
confirming the logout before the applet is closed.
For additional SNMP configuration information, see:
• Configuring SNMP Access Control
• Enabling SNMP Traps
• Configuring Specific SNMP Traps
• Configuring SNMP RF Trap Thresholds
The access point
v3 Engine ID for the access point. This ID is used in SNMP v3 as the
source for a trap, response or report. It is also used as the
destination ID when sending get, getnext, getbulk, set or inform
commands.
to save any changes to the SNMP Access screen. Navigating away from the
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the access point Access Point applet. A prompt displays
SNMP v3 Engine ID field lists the unique SNMP