Motorola P-7131N-FGR Product Reference Manual page 666

10-14 Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
3. Ensure the
When disabled, there is no automatic adoption of non-configured radios on the network.
Additionally, default radio settings will NOT be applied to access ports when automatically
adopted.
NOTE For IPSec deployments, refer to
Any WLAN configured on the switch becomes an extended WLAN by default for an AAP.
4. Select Network
5. Select the target WLAN you would like to use for AAP support from those displayed and click
the Edit
6. Select the
Selecting the checkbox designates the WLAN as independent and prevents traffic from
being forwarded to the switch. Independent WLANs behave like WLANs as used on a a
standalone access point. Leave this option unselected (as is by default) to keep this WLAN
an extended WLAN (a typical centralized WLAN created on the switch).
NOTE Additionally, a WLAN can be defined as independent using the
Once an AAP is adopted by the switch, it displays within the switch
screen (under the Network parent menu item) as an access point within the
column.
Adopt unconfigured radios automatically
IPSec and Independent WLAN on page 10-16
commands in red and associated comments in green.
> Wireless LANs
button.
Independent Mode (AAP Only)
"wlan <index> independent" command from the config-wireless context.
option is NOT selected.
Sample Switch Configuration File for
from the switch main menu tree.
checkbox.
and take note of the CLI
Access Port Radios
AP Type