Motorola P-7131N-FGR Product Reference Manual page 487

This guide provides configuration and setup in formation for the ap-7131n-fgr model access point.
Table of Contents

Advertisement

AP7131N>admin(network.router)> set
Description:
Shows the access point route table.
Syntax:
set auth
Sets the RIP authentication type (none, simple or MD5).
dir
Sets RIP direction (rx, tx or both)
id
Sets MD5 authetication ID (1-256) for specific index (1-2).
key
Sets MD5 authetication key (up to 16 characters) for specified inded (1-2).
passwd
Sets the password (up to 16 characters) for simple authentication.
type
Defines the RIP type (off, ripv1, ripv2, or ripv1v2).
dgw-iface
Sets the default gateway interface (lan1, lan2, wan or none).
For information on configuring the Router options available to the access point using the applet (GUI), see
page
5-68.
8-155
CLI Reference
Configuring Router Settings on

Advertisement

Table of Contents
loading

Table of Contents