Table of Contents
Advertisement
5-74
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
• Packets are compared with lines of the filter policy list until a match is made. Once a packet
matches a line of the list, it's acted upon, and no further comparisons take place. If inspected
packets are determined to not be IP packets, it permitted by the access point for its inbound
or outbound destination.
Once you create a filter policy, apply it to an interface in either an incoming or outgoing direction.
• Traffic entering the access point's LAN1, LAN2 or WLAN (1-16) from a client is classified as
Incoming traffic.
• Traffic leaving the access point's LAN1, LAN2 or WLAN (1-16) in route to a client is classified
as Outgoing traffic.
To filter packets to better segregate desired versus undesired data traffic:
1. Select
Network Configuration
When the IP Filtering screen is initially displayed, there are no default filtering policies, and they
must be created.
->
IP Filtering
from the access point menu tree.
Advertisement
Table of Contents
