2. Use the access point
access point's LAN1, LAN2 or WAN interfaces:
Applet HTTPS (port
443)
CLI SSH2 (port 22)
SNMP (port 161)
3. Refer to the
Applet Timeout
HTTPS Timeout
Access
field checkboxes to enable/disable the following on the
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the access point configuration applet using a Secure Sockets
Layer (SSL) for encrypted HTTP sessions.
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the access point CLI using the SSH (Secure Shell) protocol.
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the access point configuration settings from an SNMP-capable
client.
field to set an HTTPS timeout interval.
Disables access to the access point if no data activity is detected
over Applet HTTPS (port 443) after the user defined interval. The
default value is 3 minutes.
System Configuration
4-15