Configuring Snmp Access Control - Motorola P-7131N-FGR Product Reference Manual

4.6.1 Configuring SNMP Access Control

Use the SNMP Access Control
which users can read SNMP generated information and, if capable, modify related settings from an
SNMP-capable client.
Use the SNMP Access Control screen's Access Control List (ACL) to limit, by Internet Protocol (IP)
address, who can access the access point SNMP interface.
NOTE The ACL applies to both SNMP v3 user definitions and SNMP community
To configure SNMP user access control for the access point:
1. Select System Configuration
on the SNMP Access Control
2. Configure the SNMP Access Control screen to add the IP addresses of those users receiving
SNMP access.
screen (as launched from the SNMP Access screen) to specify
definitions on the access point SNMP Access screen.
- > SNMP Access
button from within the SNMP Access screen.
System Configuration
from the access point menu tree. Click
4-33