1. Select
System Configuration
access point menu tree.
CAUTION Ensure IPSec has been properly configured to protect communications
2. Configure the
SNMP v3 Trap Configuration
the following:
Add
Delete
Destination IP
Port
- >
SNMP Access
with the external SNMP server. Changes will not be applied
otherwise.
Click
Add
to create a new SNMP v3 Trap Configuration entry.
Select
Delete
to remove an entry for an SNMP v3 user.
Specify a numerical (non DNS name) destination IP address for
receiving the traps sent by the access point SNMP agent.
Specify a destination User Datagram Protocol (UDP) port for
receiving traps.
- >
SNMP Trap Configuration
field (if SNMP v3 Traps are used) to modify
System Configuration
4-35
from the