Table of Contents
Advertisement
CAUTION Restoring the access point's configuration back to default settings
Restore Default
Configuration
Restore Partial
Default Configuration
4. Use the
Reset Keys
Reset Keys to Zero
5. Refer to the
Self Test
Run Self Test
Show Self Test Logs
6. Use the
Restart
changes the administrative password back to "motorola." If restoring
the configuration back to default settings, be sure you change the
administrative password accordingly.
Select the
Restore Default Configuration
AP's configuration to factory default settings. If selected, a
message displays warning the user the current configuration will
be lost if the default configuration is restored. Before using this
feature, Motorola Solutions recommends using the
Import/Export
screen to export the current configuration for
safekeeping, see
Importing/Exporting Configurations on page
Select the
Restore Partial Default Configuration
restore a default configuration with the exception of the current
LAN, WAN, SNMP settings and IP address used to launch the
browser. If selected, a message displays warning the user all
current configuration settings will be lost with the exception of
WAN and SNMP settings. Before using this feature, Motorola
Solutions recommends using the
export the current configuration for safekeeping, see
Exporting Configurations on page
field to zeroise the key value
In AP7131N, key zeroisation function zeroises all Cryptographic
Keys and Critical Security Parameters (CSP) by overwriting the
storage area three times with an alternating pattern (i.e, three
different patterns).
field to run self tests and view self test logs.
Select the
Run Self Test
FGR access points run a series of self tests. If one of the self test
fails, the device transitions into an error state where all data output
and cryptographic operations are disabled.
Select the
Show Self Test Logs
field to restart the AP (if necessary).
button to reset the
Config Import/Export
4-47.
(if necessary).
s
button to run self tests. The AP-7131N-
to view the self test logs.
System Configuration
Config
4-47.
button to
screen to
Importing/
4-5
Advertisement
Table of Contents
