Table of Contents
Advertisement
Username
Security Level
OID
Passwords
Access
3. Specify the users who can read and optionally modify the SNMP-capable client.
SNMP Access Control Click the
4. If configuring SNMP v3 user definitions, set the SNMP v3 engine ID.
Specify a username by typing an alphanumeric string of up to 31
characters.
Use the
Security Level
(authorization with privacy).
The
AuthPriv
setting requires login authorization and uses the
Advanced Encryption Standard (AES) protocol.
Use the
OID
(Object Identifier) area to specify a setting of All or
enter a Custom OID. Select
in the MIB. The OID field uses numbers expressed in dot notation.
Select
Passwords
to display the
specifying authentication and password settings for an SNMP v3
user. The maximum password length is 11 characters. Use the
Authentication Algorithm
the authentication algorithm. Use the Privacy Algorithm drop-down
menu to define an algorithm of AES-128bit.
When entering the same username on the
SNMP Access
screens, the password entered on the SNMP Traps
page overwrites the password entered on the SNMP Access page.
To avoid this problem, enter the same password on both pages.
Use the
Access
pull-down list to specify read-only (R) access or
read/write (RW) access for a user. Read-only access permits a user
access point
to retrieve
allows a user to modify
SNMP Access Control
Access Control
screen for specifying which users can read
SNMP-generated information and potentially modify related
settings from an SNMP-capable client.
The SNMP Access Control screen's Access Control List (ACL) uses
Internet Protocol (IP) addresses to restrict access to the AP's SNMP
interface.
For detailed instructions of configuring SNMP user access and
modification privileges, see
page
4-33.
area to specify a security level of AuthPriv
All
to assign the user access to all OIDs
Password Settings
drop-down menu to specify
SNMP Traps
information, while read/write access
access point
settings.
button to display the
Configuring SNMP Access Control on
System Configuration
4-31
screen for
SHA1
as
and
SNMP
Advertisement
Table of Contents
