Table of Contents
Advertisement
Subject (required)
Department
Organization
City
State
Postal Code
Country Code
Email
Domain Name
IP Address
Signature Algorithm
Key Length
4. Complete as many of the optional values within the
possible.
5. When the form is completed, click the
screen.
The required
Subject
value contains important information about
the certificate. Contact the CA signing the certificate to determine
the content of the Subject parameter.
Optionally enter a value for your organizations's department name
if needing to differentiate the certificate from similar certificates
used in other departments within your organization.
Optionally enter the name of your organization for supporting
information for the certificate request.
Optionally enter the name of the City where the access point (using
the certificate) resides.
Optionally enter the name of the State where the access point
(using the certificate) resides.
Optionally enter the name of the Postal (Zip) Code where the
access point (using the certificate) resides.
Optionally enter the access point's Country Code.
Enter a organizational e-mail address (avoid using a personal
address if possible) to associate the request with the proper
requesting organization.
Ensure the Domain name is the name of the CA Server. This value
must be set correctly to ensure the certificate is properly
generated.
Enter the IP address of this access point (as you are using the
access point's onbard Radius server).
Use the drop-down menu to select the signature algorithm used for
the certificate. Options include:SHA256-RSA - Secure Hash
Algorithm 256 in combination with RSA encryption.
Defines the length of the key. The key size is always fixed at 2048
bytes.
Generate
Certificate Request
button from within the Certificate Request
System Configuration
4-25
screen as
Advertisement
Table of Contents
