Motorola P-7131N-FGR Product Reference Manual page 158

5-12 Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
Mesh STP
Configuration
3. Refer to the
apply existing IP filters (and their rules and permissions) to LAN1 or LAN2.
Enable IP Filtering
IP Filtering
NOTE For an overview of IP Filtering and how to create a filter, see
4. Click Apply
screen without clicking the Apply button results in all changes to the screen being lost if the
prompts are ignored.
5. Click Undo Changes
settings displayed on the LAN1 or LAN2 screen to the last saved configuration.
6. Click Logout
logout before the applet is closed.
Click the Mesh STP Configuration
settings for this specific LAN. Each of the access point's two LANs
can have a separate mesh configuration. As the Spanning Tree
Protocol (STP) mentions, each mesh network maintains hello,
forward delay and max age timers. These settings can be used as
is using the current default settings, or be modified. However, if
these settings are modified, they need to be configured for the LAN
connecting to the mesh network WLAN.
For information on mesh networking capabilities, see
Mesh Networking on page
need of an overview, see
IP Filtering field to optionally enable the IP filtering feature, and (if enabled)
Selecting this checkbox allows the LAN to employ filter policies
and rules to determine which IP packets are processed normally
over the LAN and which are discarded. If discarded, a packet is
deleted and ignored (as if never received).
Select the IP Filtering button to display a screen where existing IP
filter policies can be applied to the LAN to allow or deny IP packets
in either an incoming or outgoing direction based on the rules
defined for the policy.
IP Filtering on page
the IP packet flow of a WLAN, see
WLAN (1-16) on page
to save any changes to the LAN1 or LAN2 screen. Navigating away from the
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the Access Point applet. A prompt displays confirming the
button to define bridge
9-1. If new to mesh networking and in
Mesh Networking Overview on page
5-73. For information on applying an existing filter to
Applying a Filter to LAN1, LAN2 or a
5-76.
Configuring
9-1.
Configuring