Table of Contents
Advertisement
4-50
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
Export Configuration
NOTE Motorola Solutions recommends importing configuration files using the
NOTE When importing the configuration, a xxxxxbytes loaded status message
4. Refer to the
Status
5. Click
Apply
execute the import or export operation, only saves the settings entered.
6. Click
Undo Changes
settings displayed on Config Import/Export screen to the last saved configuration.
7. Click
Logout
prompt displays confirming the logout before the applet is closed.
Click the
Export Configuration
file from the server with the assigned filename and login
information. If the IP mode is set to DHCP Client, IP address
information is not exported (true for both LAN1, LAN2 and the
WAN port). For LAN1 and LAN2, IP address information is only
exported when the IP mode is set to either static or DHCP Server.
For the WAN port, IP address information is only exported when the
This interface is a DHCP Client
more information on these settings, see
Interface on page 5-1
The system displays a confirmation window prompting the
administrator to log out of the access point after the operation
completes for the changes to take effect. Click
operation. Click
CLI. If errors occur during the import process, they display all at once and
are easier to troubleshoot. The access point GUI displays errors one at a
time, and troubleshooting can be a more time consuming process.
indicates the file was downloaded successfully. An Incompatible
Hardware Type Error message indicates the configuration was not applied
due to a hardware compatibility issue between the importing and
exporting devices.
Status
field to assess the completion of the import/export operation.
After executing an operation (by clicking the
Export Configuration
progress indicator and messages about the success or errors in
executing the operation.
to save the filename and Server IP information. The Apply button does not
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the access point Motorola Solutions Access Point applet. A
button to export the configuration
checkbox is not selected. For
and
Configuring WAN Settings on page
No
to cancel the configuration file export.
button), check the Status field for a
Configuring the LAN
5-16.
Yes
to continue the
Import
Configuration/
Advertisement
Table of Contents
