Motorola P-7131N-FGR Product Reference Manual page 589

AP7131N>admin(system.config)> set
Description:
Sets the import/export parameters.
Syntax:
set file <filename>
path <path>
server <ipaddress>
user <username>
Example:
admin(system.config)>set server 192.168.22.12
admin(system.config)>set user myadmin
admin(system.config>set passwd georges
admin(system.config)>show
Warning: This will display secure information,
Do you want to continue? (n/y?)y
cfg filename
cfg filepath
sftp server ip address
sftp user name
admin(system.config)>
For configuration file creation and export, only the set radio-config is supported. Therefore, when configuration files for export are created,
a line such as set rf-function X wips / wlan (where X is 1 or 2) is never generated.
For configuration file import, the legacy command
There is no CLI menu allowing the user to enter
set radio-configX
Instead, the command
For information on importing/exporting access point configurations using the applet (GUI), see
4-47.
Sets the configuration file name (1 to 39 characters in length).
Defines the path used for the configuration file upload.
Sets the SFTP server IP address.
Sets the SFTP user name (1 to 39 characters in length).
: cfg.txt
:
: 192.268.0.10
:
set rf-function X wips / wlan
set rf-function X wips/wlan
(where X is 1,2,3,4,5,6,7, or 8) is created in the configuration files for export.
CLI Reference
is processed.
(where X is 1 or 2).
Importing/Exporting Configurations on page
8-257