Motorola P-7131N-FGR Product Reference Manual page 378

8-46 Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
AP7131N>admin(network.wan.nat)> add
Description:
Adds NAT entries.
Syntax:
add <idx>
Sets an inbound network address translation (NAT) for WAN address <idx>, where <name> is the name of the entry
(1 to 7 characters), <tran> is the transport protocol (one of tcp, udp, icmp, ah, esp, gre, or all), <port1> is the starting
port number in a port range, <port2> is the ending port number in a port range, <ip> is the internal IP address, and
<dst_port> is the (optional) internal translation port.
Example:
admin(network.wan.nat)>add 1 indoors udp 20 29 10.10.2.2
admin(network.wan.nat)>list 1
-----------------------------------------------------------------------------
index name
-----------------------------------------------------------------------------
1 indoor
Related Commands:
delete Deletes one of the inbound NAT entries from the list.
list Displays the list of inbound NAT entries.
For an overview of the NAT options available using the applet (GUI), see
5-22.
<name> <tran>
Transport start port
udp 20
<port1> <port2>
end port
29
Configuring Network Address Translation (NAT) Settings on page
<ip> <dst_port>
internal ip translation
10.10.2.2 0