6-26
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
5. Click
Undo Changes
settings displayed on the VPN, Auto Key Settings, IKE Settings and Manual Key Settings
screens to the last saved configuration.
6. Click
Logout
logout before the applet is closed.
6.7.1 Creating a VPN Tunnel between Two Access Points
This section describes how to define a simple configuration using two access points to create an
IPSec tunnel.
To create a IPSec VPN tunnel between two access points:
1. Ensure the WAN ports are connected via the internet
2. Select
Network Configuration
3. Enter any tunnel name (tunnel names do not need to match).
4. Enter the WAN port IP address of AP #1 in the
5. Enter the LAN IP subnet and mask of AP #2 in the
fields,
6. Enter the WAN port IP address of AP #2 in the
7. Click
Add
8. Select the
9. Select
Auto Key Settings
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the Access Point applet. A prompt displays confirming the
to add the tunnel to the list.
Auto (IKE) Key Exchange
.
->
WAN
->
VPN
from the access point menu tree.
Local WAN IP
Remote Subnet
Remote Gateway
button.
field
and
Remote Subnet Mask
field