Table of Contents
Advertisement
4-12
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
To configure the access point's switch discovery method and connection medium:
1. Select
System Configuration
2. Define the following to prioritize a switch connection scheme and AP interface used to adopt
to the switch.
Control Port
Switch FQDN
PSK
->
Adaptive AP Setup
Define the port used by the switch FQDN to transmit and receive
with the AAP. The default control port is 24576.
Add a complete switch fully qualified domain name (FQDN) to add
a switch to the 12 available switch IP addresses available for
connection. The access point resolves the name to one or more IP
addresses if a DNS IP address is present. This method is used when
the access point fails to obtain an IP address using DHCP.
Before the access point sends a packet requesting its mode and
configuration, the switch and the access point require a secure link
using a pre-shared key.
from the menu tree.
Advertisement
Table of Contents
