Table of Contents
Advertisement
7-36
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
MUs
Unit Name
2. Click the
in order to begin new data collections.
3. Click the
The Known AP Details screen displays the target AP's MAC address, IP address, radio
channel, number of associated MUs, packet throughput per second, radio type(s), model,
firmware version, ESS and client bridges currently connected to the AP radio. Use this
information to determine whether this AP provides better MU association support than the
locating access point or warrants consideration as a member of a different mesh network.
4. Click the
point.
NOTE A ping test initiated from the access point
5. Click the
within the Known AP Statistics screen.
Use the
Known AP Statistics screen. When an access point is highlighted and the Start Flash button
is selected, the LEDs on the selected access point flash. When the
selected, the LEDs on the selected access point go back to normal operation.
6. Click the
confirming the logout before the applet is closed.
The number MUs associated with the located access point.
Displays the name assigned to the access point using the System
Settings screen. For information on changing the unit name, see
Configuring System Settings on page
Clear Known AP Stats
Details
button to display access point address and radio information.
Ping
button to display a screen for verifying the link with a highlighted access
uses WNMP pings. Therefore, target devices that are not Motorola access
points are unable to respond to the ping test.
Start Flash
button to flash the LEDs of other access points detected and displayed
Start Flash
button to determine the location of the devices displayed within the
Logout
button to securely exit the Access Point applet. A prompt displays
button to reset each of the data collection counters to zero
4-2.
Known AP Statistics
Stop Flash
screen
button is
Advertisement
Table of Contents
