Telephones And Adapters - Nortel BCM1000 Installation And Maintenance Manual

50 Chapter 2 Telephony hardware

Telephones and adapters

The following telephones and devices can be used with the Business Communications Manager
system.
Digital phones
Indicator Module) — Each KIM has 24 programmable
buttons with displays. On an Ordinary Kim (OKIM), the
buttons can be programmed as memory buttons, with
internal and external autodial numbers and feature codes.
If the 7316E is configured in the system as an enhanced
CAP (eCAP), the KIM becomes an enhanced KIM (eKIM)
and can support line assignments, multiples of the same
target line, and hunt group designators, as well as memory
key functions.
N0008587 01
7100 — one-line 7208 — one-line
display, one display, eight memory
memory button buttons with indicators
without indicator.
7000 (not shown)
(International only)
— four memory
buttons, no display
or indicators.
7316 — two-line
display, three
display buttons,
16 memory
buttons with
indicators, eight
memory buttons
without indicators.
7316E — two-line display, three display buttons, 16 memory buttons
with indicators, eight memory buttons without indicators.
This telephone performs as a 7316 digital phone on systems prior to
BCM 3.5. On systems running BCM 3.5 and newer software, the
button numbering changes, the handsfree button under the dial pad is
active, and the telephone can support one or more Key Indicator
Modules (KIMs) to create a Central Answer Position (CAP).
7316E+KIM (Key