Removing PECs
The following steps describe the process for removing PECs from a BCM1000 MSC.
Ensure you have a current data backup of your system.
1
Shut down the system using the Shutdown command. For details refer to
2
system software" on page
Set up the BCM1000 for maintenance, as described in
3
on page
169.
Attach one end of the grounding strap to your wrist and the other end to a grounded metal
4
surface.
Grasp the top edge of the PEC you want to remove and pull upward. Refer to
5
Figure 129 Removing or replacing a PEC
Chapter 19 Replacing data cards and processing hardware
168. Otherwise, skip to step 2.
"Shutting down the
"Shutting down the system hardware"
Installation and Maintenance Guide
221
Figure
129.