Data Networking; Components - Nortel BCM1000 Installation And Maintenance Manual

32 Chapter 1 Introducing the Business Communications Manager
Installation overview, continued . . .
Connect
data
networking
equipment
Initialize
the system
Connect the
telephony

components

Install
optional
mobile
equipment
Set up
system
and set
configurations
N0008587 01
The data networking components of the BCM1000 provide network connection to
your local area network (LAN) and/or your wide area network (WAN). For
instructions about how to install the data networking components, refer to
"Connecting the data networking hardware" on page
Systems are shipped with a default IP and subnet mask. You must change these
settings to suit your system. Refer to
126, which also describes how to set up your computer to access the Quick Start
Wizard, which you use to perform system configuration. Refer to the Business
Communications Manager Programming Operations Guide for details about the
Quick Start Wizard.
The telephony components of the Business Communications Manager system
provide call processing and connection to the public telephone system. For
instructions about how to install telephones and components, refer to
"Wiring the modules," on page
peripherals," on page 143, and
on page 149.
The Business Communications Manager supports a number of cordless and
wireless handset systems, including Digital Mobility phones, Wireless LAN IP
telephones, and the 7406 cordless Digital Phone.
These handsets have separate installation and maintenance and user guides.
Refer to the Business Communications Manager Programming Operations Guide
to set up basic telephony and data configurations.
Refer to the separate application guides to set up optional applications such as
CallPilot or VoIP functions.
121.
"Setting initial system configurations" on page
133, Chapter 11, "Installing telephones and
Chapter 12, "Installing Analog Terminal Adapters,"
Chapter 10,