Installing The Bcm1000 Into The Rack; Figure 28 Attaching The Rack Mounting Bracket To The Bcm1000; Figure 29 Fasten The Bcm1000 To The Equipment Rack - Nortel BCM1000 Installation And Maintenance Manual

Figure 28 Attaching the rack mounting bracket to the BCM1000

Installing the BCM1000 into the rack

After the brackets are installed, perform the following steps to install the BCM1000 in the
equipment rack:
Determine the location in the rack you want to install the base unit.
1
Position the base unit in the rack.
2
Align the holes in the rack mounting bracket with the holes in the equipment rack rails.
3
Fasten the rack mounting brackets to the rack using four screws (not supplied).
4
Refer to Figure

Figure 29 Fasten the BCM1000 to the equipment rack

29.
Chapter 5 Installing the BCM1000
Installation and Maintenance Guide
73