Replacing A Fan Into The Bcm1000E - Nortel BCM1000 Installation And Maintenance Manual

204 Chapter 17 Adding or replacing a cooling fan

Replacing a fan into the BCM1000e

Follow these steps to replace the fan in the BCM1000e.
Place the fan in the BCM1000e so that the label faces the back wall of the unit.
1
Align the screw holes in the fan with the screw holes in the BCM1000e and attach the fan.
2
Connect the fan power supply cable to the hub board.
3
Replace the cover.
4
Restore the unit to operation. For details, refer to
5
The Business Communications Manager system starts up when you connect the ac power cord.
This takes several minutes to complete.
N0008587 01
"Restarting the system" on page 170.