Figure 36 Bcm1000 Ds258 Connector - Nortel BCM1000 Installation And Maintenance Manual

Plug the other end of the cable into the DS256 connector on the faceplate of the MSC in the
2
BCM1000. Refer to

Figure 36 BCM1000 DS258 connector

Warning: The timing in the Business Communications Manager system is designed for a
5 m (16 ft.) Category 5 patch cable. The system cannot work properly if you connect the
BCM1000e using a cable that is any other length.
Chapter 6 Installing the BCM1000e (expansion unit)
Figure 36.
DS256 connector
Installation and Maintenance Guide
83