Figure 93 System Configuration Start Page - Nortel BCM1000 Installation And Maintenance Manual

Note: The initialization process is automatic and takes approximately 40 minutes. The system
automatically reboots a number of times as part of the initialization process. When the first
reboot occurs, the telnet session disconnects.
When the initialization process is complete, restart a telnet session with the Business
8
Communications Manager.
At the main menu, select 2 (System configuration) and press <ENTER>.
9
The System Configuration login prompt appears.
10 Enter the default login UserID and password.
The System Configuration Start Page screen appears (see

Figure 93 System configuration start page

11 Enter q (Quick Start Page 1) and press <ENTER>.
The Quick Start Page screen appears
Chapter 16 Replacing the hard disk
Figure
(Figure 94)
Installation and Maintenance Guide
93).
187