Audio Delay; Picture Adjust; Contrast; Brightness - Denon AVP-A1HDE Owner's Manual

j Audio Delay
Compensate for mismatched timing between video and audio.
Delay audio.
This sets the delay time for audio signals.
[Variable range] ~ 200 ms
0 ms
Operating from the main unit or the main
remote control unit
b The GUI menu is not displayed when carrying out this setting.

AUDIO DELAY

q Press the button on the main unit or
the main remote control unit.
w Use the o p button to set.
• This cannot be adjusted when playing in the EXT. IN (when in analog
mode), DIRECT or STEREO mode (with "Crossover Frequency" set
to "FIXED–THX–" , "Front" set to "Large" , "Tone Defeat" to "ON" and
"Room EQ" to "OFF").
• The adjustment range is 0 to 100 ms when the Auto Lipsync
Correction function is activated.

Picture Adjust

Adjust the picture quality.
F Menu tree F
Parameter
Picture Adjust
a Contrast
s Brightness
d Chroma Level
f Hue
g DNR
h Enhancer
j Sharpness
a Contrast
Adjust picture contrast.
[Variable range] ~ ~
–6 0 +6

s Brightness
Adjust picture brightness.
[Variable range]
0
d Chroma Level
Adjust picture chroma level (saturation).
[Variable range]
–6
A. DL
button on
f Hue
Adjust color hue.
[Variable range] –6
g DNR
Reduces the overall level of noise on the picture.
[Selectable items] OFF
h Enhancer
Emphasize picture contours.
[Variable range] 0
j Sharpness
Adjust color definition.
[Variable range] –6
• When the input signal is 1080p the "Picture Adjust" setting will be
ineffective.
• Adjusting the "Contrast" , "Brightness" , "Chroma Level" and "Hue"
settings does not affect the HDMI input signal.
• "Hue" can be adjusted for composite video and S-Video signals.
• The adjustment values are stored for the individual input sources.
• "DNR" , "Enhancer" , and "Sharpness" are each effective with HDMI
output. However, they are ineffective with 480i/576i output.
~
+12
~ ~
0 +6
~ ~
0 +6
[Items to be checked]
Low Middle High
~ +12
[Items to be checked]
~ 0 ~ +6

Information

Status

Shows information about current settings.
F Menu tree F
Information
Status
a MAIN ZONE
s ZONE2/3/4
a MAIN ZONE
Shows information about settings for MAIN ZONE.
The items displayed differ according to the input source.
Select Source Name Surround Mode Input Mode Room EQ
Dynamic EQ Video Select i/p Scaler Source Level
Rec Select Night Mode RESTORER
etc.
s ZONE2/3/4
Shows information about settings for multi-zone.
Power Select Source Volume Level