Brake Light Switch; Clutch Switch (Nc700X/Xa/S/Sa) - Honda NC700XA Service Manual

dummyhead dummyhead
LIGHTS/METERS/SWITCHES

BRAKE LIGHT SWITCH

FRONT
Disconnect the front brake light switch connectors and
check for continuity between the terminals.
There should be continuity with the brake lever applied,
and there should be no continuity with the brake lever
released.
REAR
Remove the shroud/side cover (NC700X/XA/XD) (page
2-14).
Remove the shelter/side cover (NC700S/SA/SD) (page
2-15).
Disconnect the rear brake light switch 3P (Black)
connector [1] and check for continuity between the
terminals.
There should be continuity with the brake pedal applied,
and there should be no continuity with the brake pedal
released.

CLUTCH SWITCH (NC700X/XA/S/SA)

Disconnect the clutch switch connectors and check for
continuity between the terminals.
There should be continuity with the clutch lever applied,
and there should be no continuity with the clutch lever
released.
22-26
[1]