Bank Angle Sensor - Honda NC700XA Service Manual

dummyhead dummyhead

BANK ANGLE SENSOR

REMOVAL/INSTALLATION
Remove the luggage box (page 2-19).
Remove the bolts [1] and ECM box [2] from the frame.
Disconnect the bank angle sensor 2P (Black) connector
[1].
Remove the bank angle sensor mounting bolts [2] and
bank angle sensor [3].
Installation is in the reverse order of removal.
Install the bank angle sensor with its "UP" mark [1]
facing up.
TORQUE:
Bank angle sensor mounting bolt:
10 N·m (1.0 kgf·m, 7 lbf·ft)
PGM-FI SYSTEM
[1]
[2]
[2]
[1]
[3]
[1]
4-65