Ignition Coil - Honda NC700XA Service Manual

dummyhead dummyhead
IGNITION SYSTEM

IGNITION COIL

REMOVAL/INSTALLATION
No.1 IGNITION COIL
Remove the following:
– Lower cowl (page 2-28)
– Air cleaner housing (page 7-14)
Disconnect the spark plug cap [1].
Release the spark plug wire [2] from the clamp [3].
Release the clamp [4] from the frame tab.
Release the clamp [5] from the fan motor stay.
Remove the wire band [1] and spark plug wire [2] from
NC700S/SA/SD:
the main wire harness.
Disconnect the primary wire connectors [1] from the
ignition coil.
Remove the bolts [2], spacers [3] and ignition coil [4]
from the ignition coil stay.
Installation is in the reverse order of removal.
Route the wire properly (page 1-25).
No.2 IGNITION COIL
Remove the following:
– Lower cowl (page 2-28)
– Air cleaner housing (page 7-14)
Disconnect the spark plug cap [1].
Release the clamp [2] from the frame tab.
5-10
[5]
[1]
NC700S/SA/SD:
[2]
[4]
[2]
[2]
[3]
[4]
[1]
[1]
[2]/[3]
[1]