Service Information - Honda NC700XA Service Manual

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM

SERVICE INFORMATION

GENERAL
• This section covers removal and installation of the body panels and exhaust system.
• Serious burns may result if the exhaust system is not allowed to cool before components are removed or serviced.
• Always replace the exhaust pipe gasket with new ones after removing the exhaust pipe from the engine.
• When installing the exhaust system, loosely install all of the exhaust pipe fasteners. Always tighten the exhaust pipe joint nuts
first, then tighten the mounting bolts.
• Always inspect the exhaust system for leaks after installation.
TORQUE VALUES
ITEM
Seat cowl assembly screw
Brake/tail/license light mounting
socket bolt
Reflector mounting nut
Turn signal light mounting screw
Luggage box lid assembly screw
Luggage box lid lock plate
mounting screw
Luggage box lid mounting socket
bolt
Luggage box lid hinge nut
Gearshift arm pinch bolt
(NC700X/XA/S/SA)
Muffler cover socket bolt
Muffler band bolt
Exhaust pipe joint nut
Exhaust pipe stud bolt
TROUBLESHOOTING
Excessive exhaust noise
• Broken exhaust system
• Exhaust gas leak
Poor performance
• Deformed exhaust system
• Exhaust gas leak
• Clogged muffler
2-6
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
2 4
1 6
1 5
4 6
9 4
2 6
3 6
1 6
1 6
1 6
1 8
3 8
3 8
TORQUE
0.9 (0.1, 0.7)
10 (1.0, 7)
1.7 (0.2, 1.3)
2.5 (0.3, 1.8)
0.9 (0.1, 0.7)
4.0 (0.4, 3.0)
12 (1.2, 9)
12 (1.2, 9) U-nut
12 (1.2, 9) ALOC bolt; replace with a new one.
10 (1.0, 7)
17.5 (1.8, 13)
28 (2.9, 21) See page 2-34
– See page 2-35
REMARKS