Cylinder Head - Honda NC700XA Service Manual

dummyhead dummyhead
CYLINDER HEAD/VALVES
Install and tighten the bolts [1].
Connect the water bypass hose [2].
• Align the water bypass hose index mark with the
water pump tab.
• Route the hoses properly (page 1-25).
Tighten the water hose band screws to the specified
range as shown.
Install the engine.
– NC700X/XA/S/SA (page 16-15)
– NC700XD/SD (page 16-21)

CYLINDER HEAD

REMOVAL
Remove the following:
– Engine
– NC700X/XA/S/SA (page 16-5)
– NC700XD/SD (page 16-9)
– Cylinder head cover (page 10-5)
– Right crankcase cover
– NC700X/XA/S/SA(page 11-5)
– NC700XD/SD (page 12-97)
Remove the camshaft maintenance cap [1] and O-ring
[2].
10-16
[2]
[1]
0 – 1 mm
(0 – 0.04 in)
[1]
[2]
Align