Luggage Box Lid/Hinge Assembly; Luggage Box - Honda NC700XA Service Manual

dummyhead dummyhead

LUGGAGE BOX LID/HINGE ASSEMBLY

REMOVAL/INSTALLATION
Remove the shroud/side cover (NC700X/XA/XD) (page
2-14).
Remove the shelter/side cover (NC700S/SA/SD) (page
2-15).
Remove the screw [1] and disconnect the band [2].
Remove the socket bolts [3] and bolts [4] and luggage
box lid/hinge assembly [5].
Installation is in the reverse order of removal.

LUGGAGE BOX

REMOVAL/INSTALLATION (NC700X/XA/XD)
Remove the following:
– Shroud/side cover (page 2-14)
– Center cover (page 2-16)
Release the following:
– Turn signal/hazard relay [1] from the luggage box
tab
– Seat lock cable [2] from the luggage box cable
guides
– Option 6P connector [3] from the luggage box
Remove the bolts [4], socket bolts [5] and luggage box
[6].
Installation is in the reverse order of removal.
• For luggage box lid removal/installation (page 2-17).
• Route the cable properly (page 1-25).
FRAME/BODY PANELS/EXHAUST SYSTEM
[2]
[1]
[3]
[6] [5]
[1]
[2]
[3]
[5]
[4]
[4]
2-19