Air Cleaner Housing - Honda NC700XA Service Manual

dummyhead dummyhead
FUEL SYSTEM
Install the fuel pump unit [1] into the fuel tank.
Be careful not to damage the fuel level sensor float arm
[2].
Install and tighten the fuel pump mounting nuts [1] to
the specified torque in the sequence as shown.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the fuel tank (page 7-8).

AIR CLEANER HOUSING

REMOVAL/INSTALLATION
Remove the air cleaner (page 3-7).
Remove the bolts [1] and radiator lower stay [2].
Release the radiator boss from the radiator mounting
rubber [3].
Release the fan motor 3P (Gray) connector [1], air
cleaner housing drain hose [2] and spark plug wire [3]
from the radiator.
7-14
[1]
[2]
3
1
5
[1]
[3] SLITS [1]
[2]
6
2
4
[1]
[2]
Align
[1] [3]