Clutch System (Nc700X/Xa/S/Sa) - Honda NC700XA Service Manual

dummyhead dummyhead
MAINTENANCE
Adjust the headlight aim horizontally by turning the
horizontal beam adjusting screw [1].
A clockwise rotation moves the beam toward the right
and counterclockwise rotation moves the beam toward
the left.

CLUTCH SYSTEM (NC700X/XA/S/SA)

Measure the clutch lever freeplay at the end of the
clutch lever.
FREEPLAY:10 – 20 mm (3/8 – 13/16 in)
Minor adjustment is made with the upper adjuster at the
The adjuster may
clutch lever.
be damaged if it is
positioned too far
Loosen the lock nut [1] and turn the adjuster [2].
out, leaving minimal
If the adjuster is threaded out near its limit and the
thread
correct freeplay cannot be obtained, turn the adjuster all
engagement.
the way in and back out one turn.
Tighten the lock nut while holding the adjuster.
Recheck the clutch lever freeplay.
3-26
NC700X/XA/XD:
[1]
NC700S/SA/SD:
10 – 20 mm (3/8 – 13/16 in)
[1] [2]
[1]