Voltage Inspection; Battery Testing - Honda NC700XA Service Manual

dummyhead dummyhead
BATTERY/CHARGING SYSTEM
BATTERY
REMOVAL/INSTALLATION
Open the luggage box lid using the ignition key.
Remove the screws [1] and maintenance lid [2].
Remove the battery holder band [3].
Always turn the
ignition switch OFF
Disconnect the battery negative (–) cable [4] first, then
before removing the
disconnect the battery positive (+) cable [5].
battery.
Remove the battery [6].
Installation is in the reverse order of removal.
• Connect the positive (+) cable first, then connect the
negative (–) cable.
• For digital clock setting procedure (page 22-14).

VOLTAGE INSPECTION

Remove the maintenance lid (page 21-6).
Measure the battery voltage using a commercially
available digital multimeter.
VOLTAGE (20°C/68°F):
Fully charged:
Needs charging: Below 12.4 V

BATTERY TESTING

Remove the battery (page 21-6).
Refer to the instructions that are appropriate to the
battery testing equipment available to you.
TOOL:
Battery tester
21-6
13.0 – 13.2 V
BM-210 or
BATTERY MATE
or equivalent
[1]
[4]
[6]
[3]
[5]
[2]